User Tools

Site Tools



The HBC101 is an exciting evolutionary motion control product based on a Motorola DSP (Digital Signal Processor). The board can both control as well as capture RC (Radio Control) servo PPM (Proportional Pulse Modulation) signals at resolutions not seen in other servo control products.

The board has eight highresolution PPM outputs and eight highresolution PPM inputs. Unused servo output pins can be reconfigured as digital outputs for controlling on/off devices. Four of these outputs have been buffered so that small devices such as relays and solenoids may be directly driven.



  • RS232 interface
  • Addressable up to 255 boards
  • Dimensions: 3.0“ x 3.5” x 0.6“
  • 115,200bps maximum true RS-232 level IO
  • Eight 0.009° (100ns) resolution PPM outputs (500ns to 6.5us high pulse)
  • Eight PPM inputs with 0.009° (100ns) resolution (500ns to 6.5us high pulse)
  • Unused servo outputs can be reconfigured for digital output. Of which, four of them can sink up to 300mA for driving small relays or solenoids
  • Unused servo inputs can be reconfigured for digital input. All of which are buffered forup to a 40V input signal.
  • Six 15-bit resolution 0% to 100% PWM outputs for driving H-Bridge circuits
  • 8-channel 12-bit ADC pins for measuring 0V-3.3V analog signals
  • Field Upgradeable Firmware
  • 8K Byte EEPROM


S-Record Loader, use this application to upload HBC101 firmware updates.

products/hbc101.txt · Last modified: 2009/07/06 02:44 (external edit)